论文部分内容阅读
磨削过程所固有的一系列变化因素对尺寸加工误差,以及粗糙度和锥度等都有一定的影响,因此合理组织加工循环过程可以作到在单位时间内磨去最多的金属而又能保证加工质量。此时在每个具体的加工循环中,都应根据加工条件将各种因素加以适当的配合。用普通主动检查仪来控制加工过程是不能解决这一问题的。因为,这种仪器只能根据剩下的加工余量来发指令。
A series of inherent variation factors in the grinding process have certain influence on the dimensioning error, as well as the roughness and taper, etc. Therefore, the rational organization of the machining cycle can be achieved by grinding the most metal in the unit time and ensuring the processing quality. At this time in each specific processing cycle, should be based on processing conditions will be a variety of factors to be properly coordinated. With the normal active checker to control the process can not solve this problem. Because, this kind of instrument can only send the order according to the remaining allowance.