电力系统动态有功功率优化的研究

来源 :南昌大学 | 被引量 : 0次 | 上传用户:ydaf2ut9
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The objective of this work is to develop a comprehensive formulation and an efficient solution algorithm for the dynamic active power optimization problem in Power Dispatch which takes into account the detailed and extensive modeling necessary for use in power flow analysis of real power system.The content relate to the aspect of electric power systems,power-flow calculation, incremental transmission losses,dynamic active optimization dispatch.Active power optimization is one of the economical operations of power system,it is very important for ensuring voltage quality,security and economic ofpower system. This work has focus attention to the following points:comprehensive analysis and research for the dynamic optimization dispatch theory and algorithms;proposing a dynamic analyzing method via static optimization strategy the load-curve pre-analysis process,back-navigation-constraint treatment;proposing the look-ahead-constraint in classical methods form.By studying the look ahead-constraint of dynamic optimal dispatch,this thesis gives the concept of response capacity to the increase of load.Moreover,in accordance with the very special stages,an approach using back-navigation-constraint in load curve pre-analysis is presented.A complete dynamic active power dispatch model,calculation steps and flowchart which are recommended by their rapid computation,less memory requirements and higher computational accuracy are detailed in this work.The outcome can be regarded as the basis for the programming and the management of the power systems.
其他文献
随着现代信息技术的快速发展,对强震观测仪提出越来越高的要求。针对强震观测信号持续时间长、报告实时性强、幅值动态范围大的特点,本文提出并开发了一种基于ARM7系列芯片、
本文对纳米结构材料进行了较系统的分子动力学研究。自行开发了一套从并行计算,数据处理到交互式显示和分析控制的模拟系统,实现了具有10纳米三维空间尺度和纳秒级时间尺度的分
该论文在详细评述目前国内外固液两相流及高含沙水库计算数学模型的研究成果基础上,首先根据固液两相流基本理论,推求出了新的固液两相流周界变形方程.文中通过对库区支流入
一堂课,教师精神饱满,激情飞扬,学生积极主动参与,课堂气氛民主活跃,师生互动心情愉悦,视共同学习为最大的快乐.这就是新课程改革中所倡导的充满生命活力的有效课堂.高中语文
期刊
随着社会的各个领域的飞速发展,我国的经济也在高速的增长.机械设计制造及自动化的领域也出现了技术革新的局面.而就目前的社会发展状况而言,机械设计制造的发展前景必然与当
智能变电站是电网运行数据采集源头和命令执行单元,也是实现智能电网自动化特征的主要体现。智能变电站通过增加过程层网络实现与一次设备的数字化接口,过程层网络传输的可靠性将直接影响智能变电站的安全运行,应对如何提高500kV过程层网络传输可靠性展开专门研究。智能变电站由于增加了过程层网络中间实现环节,带来继电保护整组动作时间延长问题。目前2011版、2015版国家电网公司《通用设计》500kV电压等级采
上世纪七十年代以来,电爆炸丝物理现象在脉冲功率调节技术的需求牵引下,得到了广泛而深入的研究,总结出来一些行之有效的理论模型和经验公式,适合于较长脉冲(10μs量级)运行时间
该文结合性能设计分析方法和结构可靠度理论,以确定结构主要失效模式和计算失效模式相关性为主要研究内容,对结构体系可靠度分析进行了系统的研究.首先,根据结构设计可靠度的
该文回顾交通流理论的发展历史,分析和评述主要的交通流模型.交通流连续模型基于LWR模型和Payme模型而建立,作者针对其差分模式可能引起数值模拟时的不稳定,对连续模型中连续
扫描电子显微镜(SEM)是观察和分析微观物质形貌和特性的重要工具,它广泛应用于物理、化学、地质、电子工业和生物科学。在目前使用的SEM 中,有大量SEM 由于生产年代较早,未配备图