基于新型双频移相功分器的组合四臂螺旋天线

来源 :2013年全国天线年会 | 被引量 : 0次 | 上传用户：nightcatwu

【摘要】

：

为了满足北斗卫星(CNSS)导航和通讯中对于天线宽波束、圆极化以及低仰角增益的要求,设计了新型双频移相的功分器馈电网络,减小了四臂螺旋天线(QHA)的馈电网络尺寸,实现了接收天线和发射天线的紧凑型组合.并且,在组合四臂螺旋天线中引入了开关状态切换,达到了利用单个馈电网络向两个不同频段的四臂螺旋天线馈电的设计目的.

【作者】

：

王任吴明和黄卫英

【机构】

：

电子科技大学物理电子学院,成都610054

【出处】

：

2013年全国天线年会

【发表日期】

：

2013年11期

【关键词】

：

四臂螺旋天线功分器馈电网络双频移相

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

Value-in-use Analysis of Using Olivine Flux for Agglomerate-and Iron-making Processes

Olivine,as one MgO containing material,can be used as one type of fluxing additives for sinter,pellet and blast furnace.In this work,the benefits of using olivine flux for agglomerate-and iron-making

会议

olivinesinterpelletblast furnacevalue-in-use

Assessment of Low Temperature Waste Heat Utilization in the Steel Industry through Process Integrati

This article presents a techno-economic evaluation of various options for recovery and reuse of low temperature heat(LTH)with temperatures below 350°C.A process integration approach has been applied t

会议

low temperature heatflue gassteel industryprocess integration

Competitive Formation of Reverted Austenite with Cu-rich Precipitate and Alloyed Carbide in a HSLA S

The austenite reversion in a Cu-containing 3.5wt.%Ni high-strength low-alloy(HSLA)steel with intercritical heat treatment was investigated by electron back-scatter diffraction(EBSD),transmission elect

会议

reverted austeniteCu-rich precipitateC-rich precipitateintercritical temperin

具有优异低温韧性和抗应变性能的X80管线钢板/管显微组织识别

随着全球对天然气能源需求的增长,长输管道建设向地震、北极等区域延伸,而由于存在永冻现象这些区域易产生大的地面位移,为确保永冻区域管道的安全运行,要求其所用管材需具有抗应变能力,即管体纵向具有低的屈强比、高均匀延伸率以及拱顶(Roundhouse)型应力应变曲线特征,同时管体横向具有高的强度,此外还需确保具有高的低温韧性.本文介绍了宝钢和CSM公司合作开展的X80应变设计钢管开发合作项目,宝钢研究院

会议

管线钢轧制工艺显微组织力学性能

Numerical Investigation on Turbulent Multiple Jets Merging and Acoustic Characteristic in the Slab S

In order to predict the multiple jets screech phenomenon in the scarfing process of rolling slab,a three-dimensional transient mathematical model has been developed to investigate the turbulent multip

会议

multiple jetsacoustic characteristicnoise predictedcoanda effectscarfing pro

COREX(R) - An Answer for Hot Metal Production in a Changing Environment

The COREX(R)Process is a well-established route for the production of hot metal and beside the FINEX(R)Technology the only industrially realized alternative to the blast furnace route.Changes in the t

会议

COREX(R)MIDREXTMeconomicsexport gas utilizationhot metalDRI

New Developments in Energy Efficiency and Energy Recovery for BOF Dry Dedusting Systems

This paper describes the improvements and new developments made in the area of energy saving for dedusting system operations,in particular for dry dedusting system,and increased energy recovery.It pro

会议

BOFDDSconverterdry dedustingESPenergy efficiencysteam productioncooling s

590MPa级车轮用热轧卷板的研制

介绍了本钢2300热连轧机组590MPa级车轮用RS590热轧高强度卷板的产品设计、冶炼、轧制工艺和性能情况.结果表明在低碳、硅锰系成分基础上,添加少量的Nb和Cr元素,结合控轧控冷,成功开发了590MPa级的车轮用RS590热轧卷板.所开发的RS590车轮用热轧卷板具有高的疲劳性能、高的成形性能和良好的焊接性能,不仅可用于制作车轮的轮辋,还可用于制作高扩孔率要求的乘用车车轮轮辐。

会议

高强度钢热轧工艺疲劳性能成形性能焊接性能

An Investigation into the Wear Behaviour of High Speed Steel Work Roll Material under Service Condit

HSS work rolls have been utilized for both early and last finishing stands in hot strip mills due to their high hardness,good wear resistance and high temperature properties.During hot rolling,the wor

会议

high speed steelwork rolloxidationwearhot strip rolling

Study on High Volume Flexible Manufacturing by Using the Sheet Metal Roll Forming Process

Increasing model variety,more vehicle customization and shorter innovation cycles have a strong impact on productivity and quality.The number of platforms and body types are permanently increasing ins

会议

flexible manufacturingmass production3D-roll formingsheet metal formingtruck

基于新型双频移相功分器的组合四臂螺旋天线

其他学术论文