高速转子试验器包容环厚度计算

来源 :第三届中国国际透平机械学术会议 | 被引量 : 0次 | 上传用户：kangcj66

【摘要】

：

立式转子试验器可以进行各种高速旋转试验,对于有破坏性的超转和破裂试验,高强度的包容结构十分必要.传统的能量法和包容曲线法无法获得结构破坏的细节信息,本文采用能量法与仿真模拟相结合的方法,对试验器外环的包容强度和厚度尺寸进行研究,计算与试验结果表明该方法可以较好地评估试验器结构强度.

【作者】

：

祝昭丹陈国栋刘闯李铁

【机构】

：

中国航发沈阳发动机研究所

【出处】

：

第三届中国国际透平机械学术会议

【发表日期】

：

2018年9期

【关键词】

：

旋转机械高速转子试验器包容环厚度计算

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

水泵轴系转子动力学计算分析

总结了水泵转子轴系转子动力学计算分析方法,给出了考虑密封影响的水泵轴系转子动力学计算分析方法.以某高压水泵轴系为例,利用转子动力学专业计算分析软件Madyn2000,对轴系各种支承状态进行了临界转速计算分析,与实际测试结果对比.同时也进行了考虑密封的频率响应分析,分析了密封对频率响应的影响.

会议

旋转机械水泵轴系转子动力学临界转速

Modeling for 2D Compressor Cascade Loss,Deviation and Range of Incidence Based on the Numerical Meth

The flow field in a compressor cascade is very complex due to the highly three-dimensional,turbulent and viscous effects.However,in the through-flow analysis method,viscosity effects are taken into ac

会议

empirical modelscompressors cascadesregression analysisartificial neural netw

Optimization of the Nose stay vane Structure of the Pump Turbine Model

With the development of the pumped storage power station,the efficiency of the pump turbine has become a research topic in the field of the hydraulic power generation.A numerical simulation study of t

会议

Pump TurbineNose Stay VaneOpen HoleEfficiencyPressure Pulsation

Remarks on Time-Accurate Adjoint of Quasi-One-Dimensional Euler Equations

For the optimization of turbine equipment,artificial regulation relying on the experience and global optimization are difficult to ensure the optimization efficiency.Thus,local optimization,mainly inc

会议

Time-AccurateQuasi-One-DimensionalEuler Equationsadjoint methoddiscretizatio

THE EFFECT OF INLET TOTAL PRESSURE NONUNIFORM DISTRIBUTION ON AERODYNAMIC PERFORMANCE AND FLOW FIELD

The real turbine inlet boundary conditions have significant spatial nonuniformity,which has a strong effect on downstream aerodynamic characteristics.However,the importance of the total pressure nonun

会议

turbine inletnon-uniform distributiontotal pressure gradientnumerical researc

Shape Optimization of a Modified Centrifugal Compressor using the Adjoint Method

Centrifugal compressors can realize a high pressure ratio within a relatively small spatial space,therefore largely used in aviation impeller machinery.Pursuing less size and weight while no penalty o

会议

OptimizationAdjoint MethodCentrifugal CompressorKrain ImpellerEntropy Genera

MULTI-OBJECTIVE OPTIMIZATION DESIGN OF A CENTRIFUGAL IMPELLER

A parameterization method of radial turbo machinery is presented in this paper,and corresponding computer code is developed.An optimization platform for a centrifugal impeller is constructed by integr

会议

Centrifugal impellerParameterizationOptimization

叶轮泵中旋转空化机理及影响因素的研究进展

旋转空化是一种两相非定常现象,分为三类:超同步旋转空化、同步旋转空化、次同步旋转空化.本文阐述了旋转空化发生的典型特征:起始取决于空化数与2倍入射角(σ/2θ)的比值;扬程下降迟缓,产生轴振动(一种自激振动).影响旋转空化的因素有:空化数、入射角、空穴长度、热力学等.此外,理论推导了B因子和热力学参数Σ.

会议

叶轮泵旋转空化机理流场特征结构优化

MULTI-OBJECTIVE OPTIMIZATION OF A FAN AIRFOIL ADAPTIVE FOR THE INLET DISTORTION

Boundary Layer Ingestion(BLI)propulsion systems can significantly reduce the aircraft fuel burn but these systems can bring the inlet distortion problem to the fan and reduce its aerodynamic performan

会议

Inlet DistortionFan AirfoilProfile LossMulti-objective Optimization

Study on Overall Design Method of Turboshaft Engine Considering the Difficulty Coefficients

Based on the coupled design and computation models of both engine and components,this paper presents a compositive methodology of the whole engine design considering the difficulty coefficients,which

会议

turboshaft enginecoupled designdifficulty coefficientswhole engine design

高速转子试验器包容环厚度计算

其他学术论文